Posted   by 

Usbasp V2 0 Driver Windows 10

I'm am having issues with my USBasp programmer (Windows 10). I installed the WinUSB driver using zadig 2.4. When I run AVR dude with the following parameters. Avrdude -c USBasp -p m32u4 -u -U flash:w:justahex.ino.hex:i It immediately returns with this error: avrdude: error: could not find USB device with vid=0x16c0 pid=0x5dc vendor='www.fischl. If you are on Windows, you will need to install the drivers for the programmer. A lot of sites will say you need to disable driver signing and do a whole bunch of steps, but the drivers found here will install on Windows 10 (they are signed) when installed using the installer (but not when you try to install the drivers yourself).

Description

USBasp V2.0 is a USB in-circuit programmer for Atmel’s: ATMEGA, ATTINY, AT90, AT90CAN and AT90PWM Series Microcontrollers.

Features

  • Onboard ATMega8(L).
  • Onboard over-current protection.
  • 3.3V and 5V logic level Selection jumper (JP1)
  • Self program (firmware update) jumper (JP2)
  • Clock Speed control Jumper (JP3)
  • USB Type A connector for directly pluging in to PC USB port
  • 10 Pin IDC Shrouded Male Header
  • On board power and programmer status LEDs
  • Supported OS: Windows 8, Windows 7, Works under multiple platforms. Linux, Mac OS X and Windows are tested.
  • Programming speed is up to 5kBytes/sec.

Supported Microcontrollers

Mega Series

ATmega8 ATmega8A ATmega48 ATmega48A ATmega48P
ATmega48PA ATmega88 ATmega88A ATmega88P ATmega88PA
ATmega168 ATmega168A ATmega168P ATmega168PA ATmega328
ATmega328P ATmega103 ATmega128 ATmega128P ATmega1280
ATmega1281 ATmega16 ATmega16A ATmega161 ATmega162
ATmega163 ATmega164 ATmega164A ATmega164P ATmega164PA
ATmega169 ATmega169A ATmega169P ATmega169PA ATmega2560
ATmega2561 ATmega32 ATmega32A ATmega324 ATmega324A
ATmega324P ATmega324PA ATmega329 ATmega329A ATmega329P
ATmega329PA ATmega3290 ATmega3290A ATmega3290P ATmega64
ATmega64A ATmega640 ATmega644 ATmega644A ATmega644P
ATmega644PA ATmega649 ATmega649A ATmega649P ATmega6490
ATmega6490A ATmega6490P ATmega8515 ATmega8535

Usbasp Driver For Windows

Tiny Series

ATtiny12 ATtiny13 ATtiny13A ATtiny15 ATtiny25
ATtiny26 ATtiny45 ATtiny85 ATtiny2313 ATtiny2313A

Classic Series

Driver

AT90S1200 AT90S2313 AT90S2333 AT90S2343 AT90S4414
AT90S4433 AT90S4434 AT90S8515
AT90S8535

Can Series

AT90CAN128
PWN Series
AT90PWM2 AT90PWM3

Documents & Downloads

  • USBASP V2.0 User Guide
  • AVRDUDE supports USBasp since version 5.2.
  • BASCOM-AVR supports USBasp since version 1.11.9.6.
  • Khazama AVR Programmer is a Windows XP/Vista GUI application for USBasp and avrdude.
  • eXtreme Burner – AVR is a Windows GUI Software for USBasp based USB AVR programmers.
  • A command line light weight dfu-programmer can also be used
  • USBASP Driver
  • To easily install USB Driver (without requiring windows signature check) on Windows 10, and Windows 8 you can use Zadig tool. The detailed procedure can be seen here

Usbasp V2 0 Driver Windows 10 Windows 7

Also buy AVR-ISP 10Pin to 6pin Adapter PCB (Not included with USBASP V2.0 programmer)

Usbasp V2.0

Package including

Usbasp Windows 10

  • 1x USB ISP Programmer V2.0 (with over-current protection)
  • 10 -way ribbon cable